Calculate PCM requirement

CALCULATION FOR AMOUNT OF PCM – IN AN INSULATED BOX

CALCULATION FOR AMOUNT OF PCM – IN AN INSULATED BOX

Input

Length (L)
Width (W)
Height (H)
Insulation Thickness (T)
Insulation Material
Avg. Ambient Temp.
Box’s Inside Temp. required
For how many hours	hours
Choose the Application Type*	Cooling Heating / Warming
	* – If the ambient temp is lower than Box’s inside temp – Heating / Warm Aplication
	If the ambient temp is higher than Box’s inside temp – Cooling Application

Temp Difference	°C
Total energy to be removed	W
PCM NAME savENRG™
Total amount of PCM is	kg OR pound

Encaps

Choose any encapsulation:

TSM6 (600 ml) TSM4 (400 ml) TSM14 (500 x 200 x 20 mm – 1400 ml)

Result

Total no of containers:	nos
Total Weight (PCM+Container) is	kg OR	pound

Note:

The ACTUAL total amount of PCM (number of encapsulations and weight of PCM) and total weight may vary from the shown result as the individual weight of encapsulation vary from container to container.

The information given here is meant as a guide to determining suitability of our products for the stated applications. The products are intended for use in industrial applications. The users should test the materials before use and satisfy themselves with regard to contents and suitability in the desired application. Recommendation herein may not be construed as freedom to infringe/operate under any third party patents. In the event of a proven claim, our liability is limited only to replacement of our material and in no case shall we be liable for special, incidental or consequential damages arising out of usage of our material.Some of the data are obtained from sources beyond our direct supervision and control. We cannot make any assertions as to reliability or completeness, therefore user may rely on it at user’s risk